News list
Analysis and Handling of Software Defects in CNC Surface Grinding Machines
time:2024-10-8 16:59:11 人气:
The CNC surface grinder is composed of hardware and software independently, so software and software need to be separated during equipment maintenance. The hardware disadvantage of CNC 3D grinding machines refers to the lack of software maintenance, requiring software conversion or maintenance, and requiring simple adjustment of data or batch order for cleaning. How many types of hardware defects are there
Hardware defects caused by incorrect processing sequence planning. This type of defect can be detected through the alarm of the CNC system, which is negligible and normal. Based on the alarm information, defects can be cleared by checking and correcting the processing sequence.
The hardware disadvantage of CNC 3D grinding machines is the lack of accurate composition data and parameter devices. At present, there are very few equipment required for the data of CNC 3D grinders. Sometimes, due to excessive backup battery power, electromagnetic interference, human error, and other reasons, the data of CNC 3D grinders may change. Perhaps the CNC 3D grinder needs to collect some data after a period of use, but the collection has not stopped. At this point, CNC 3D grinding machines will have drawbacks. These shortcomings can be corrected by adjusting the corresponding data.
Inaccurate hardware defects occur during operation. This disadvantage is often caused by operational errors when CNC 3D grinders are first put into use or when new operators are replaced.