Column type surface grinder YD-50100~60200AS
SPECIFICATION / MODELS | YD-50100AS | YD-50120AS | YD-50150AS | |||||
Capacity | Available area of working table | mm | 500x1000 | 500x1200 | 500x1500 | |||
Maximum moving dimension from left to right | mm | 1040 | 1300 | 1600 | ||||
Maximum moving dimension from front to back | mm | 540 | ||||||
Maximum distance from surface of working table to spindle | mm | 680 | ||||||
Maximum load-bearing of the workbench | kg | 1000 | ||||||
Slot in working table | mmxN | 16x3 | ||||||
Speed of working table | m/min | 5-25 | ||||||
Working table and cross movement | Front&rear handwheel feed | 1rev | mm | 5 | ||||
1gra | mm | 0.02 | ||||||
Auto-supplying from front to back | mm | 0.5-12 | ||||||
High speed moving from front to back | mm/min | 1250(50HZ)/1500(60HZ) | ||||||
Working table guide rail | V-V | |||||||
Grinding Wheel | Dimension(O.D x W x I.D) | mm | 355x(20-40)x127 | |||||
Spindle speed(50/60Hz) | r.p.m | 1450/1740 | ||||||
Vertical movement | Vertical feed on handwheel | 1rev | mm | 0.01/0.1/1 | ||||
1gra | mm | 0.001/0.01/0.1 | ||||||
Rapid power Vertical feed approx | mm/min | 230 | ||||||
Motor | Spindle motor | HP | 7.5x4 | |||||
Rapid elevation drive | W | 1/2x4/1.5KW | ||||||
Hydraulic motor | HP | 5x6 | ||||||
Cross drive motor | NM | 1/4x6/1.5KW | ||||||
Coolant pump | HP | 1/4x2 | ||||||
Weight | Net weight | kg | 5000 | 5100 | 5300 | |||
Gross weight | kg | 6500 | 6100 | 6300 | ||||
Machine Size | Dimension (L x W x H) | m | 4.5x2.4x2.3 | 4.5x2.4x2.3 | 4.5x2.4x2.3 |
SPECIFICATION / MODELS | YD-60100AS | YD-60120AS | YD-60160AS | YD-60200AS | ||||
Capacity | Available area of working table | mm | 600x1000 | 600x1200 | 600x1600 | 600x2000 | ||
Maximum moving dimension from left to right | mm | 1040 | 1300 | 1700 | 2100 | |||
Maximum moving dimension from front to back | mm | 640 | ||||||
Maximum distance from surface of working table to spindle | mm | 700 | ||||||
Maximum load-bearing of the workbench | kg | 1500 | ||||||
Slot in working table | mmxN | 16x3 | ||||||
Speed of working table | m/min | 5-25 | ||||||
Working table and cross movement | Front&rear handwheel feed | 1rev | mm | 5 | ||||
1gra | mm | 0.02 | ||||||
Auto-supplying from front to back | mm | 0.5-12 | ||||||
High speed moving from front to back | mm/min | 1250(50HZ)/1500(60HZ) | ||||||
Working table guide rail | V-V | |||||||
Grinding Wheel | Dimension(O.D x W x I.D) | mm | 400x(20-50)x127 | |||||
Spindle speed(50/60Hz) | r.p.m | 1450/1740 | ||||||
Vertical movement | Vertical feed on handwheel | 1rev | mm | 0.01/0.1/1 | ||||
1gra | mm | 0.001/0.01/0.1 | ||||||
Rapid power Vertical feed approx | mm/min | 230 | ||||||
Motor | Spindle motor | HP | 10x4 | |||||
Rapid elevation drive | W | 1/2x4/1.5KW | ||||||
Hydraulic motor | HP | 7.5x6 | ||||||
Cross drive motor | NM | 1/4x6/1.5KW | ||||||
Coolant pump | HP | 1/4x2 | ||||||
Weight | Net weight | kg | 5500 | 6000 | 6500 | 7500 | ||
Gross weight | kg | 6500 | 7000 | 7500 | 8700 | |||
Machine Size | Dimension (L x W x H) | m | 6x2.5x2.3 | 6x2.5x2.4 | 6.4x2.7x2.4 |
Notes:
·The specification are subject to modification without notice.